Steel Scaffolding – Jack Nut 48mm (T)
Our company manufactures high quality of Jack nut 48mm. It is also Made of Ductile Casting of 400/12 Grade and 48mm Diameter of jack nut.
Steel Scaffolding – Jack Nut Casted 38mm (R)
Our company gained a experience of manufacturing the product Jack Nut Casted 38mm. It is made up of Ductile Casting of 400/12 Grade and 38mm Diameter.
Steel Scaffolding – Ledger Blade With Hole
Our company gained years of experience in the manufacturing of Ledger Blade with a hole, these products are made by the guidance of the professional team and hard work of the workers with each other in coordination by using the well-equipped tools.
Steel Scaffolding – Top Cup 4 Lugs Forged
Specification:
Top cup 4 lugs forged are made From Forged Steel.
Top cup 4 lugs forged is Used With 48.3mm Scaffolding Pipe.
Steel Scaffolding – Ledger Blade
Product Description:
Our company manufacture Forged Ledger Blade and it is widely used in Horizontal end of pipe for Cup lock system. Ledger Blade is Quinine & Tempered.
Steel Scaffolding – Bottom Cup
Product Specification:
- Surface Type – Hot Dipped Galvanized
- Brand – SB Scaffolding
- Material – Stainless Steel
- Material Grade – Q 235
- Surface – Noncorrosive
- Thickness in Diameter – 25 mm and 29 mm
- Weight – 0.18 kg
Steel Scaffolding – Top Cup
We have earned a great reputation since our establishment by providing quality of Top Cup to our clients. Owing to their dimensional accuracy, seamless finish, rugged construction, application specific design these products are highly demanded.
Features:
- Rugged construction
- Longer functional life
- Application specific design
- Corrosion resistant
Steel Scaffolding – Four Way Head
Made from low carbon steel and used above the standard to support the wooden I- Sections. For 2 Beams of 80mm width.
Uses:
To support scaffold structure
Safe & reliable adjustment of height
Lock nut for adjustment
Can be used with different pads Product
Steel Scaffolding – Base Plate
Made from Plate of Low carbon steel to support the Standards and Ledgers. Made from pipe of 38mm X 100mm, welded with a plate of 150 X 150 X 6 mm and the usability of it is very good and with it, a person can work easily and safely.
Steel Scaffolding – Universal Clamp
This is used to hold the Primary and the Secondary I-sections together. Made from 4mm thick sheet with the Carriage bolt of M12 X 125mm and it is very much full fill the requirements of clients and very easy to work with it and safely also.
Steel Scaffolding – Infill Beam
The Secondary Beam used with the Decking Beam to form the Decking System. Made from Sheeted Components, unused with Decking beams and the sheet thickness is 2mm and available lengths of 0.9mtr, 1mtr, 1.2mtr, 1.5mtr, 1.7mtr, 1.8mtr, 2mtr and it provides the transom support underneath in the plywood and very useful thing to use.
Steel Scaffolding – Decking Beam
The Primary Beam that is used with the Drop Head to form the Decking System. Made from Sheeted components, used with Drophead, the sheet thickness is 3mm and available in lengths of 1.2mtr, 1.8mtr, and 2.5mtr and it has many benefits in it like it can Load carrying capacity, the Stability criteria and it is a durable product.
Steel Scaffolding – Drop Head
Component of the Decking System, use over each standard with a socket adaptor. Made from Sheeted component, The Height is 70mm.
The range of Drop Head offered by us is used for vertical, jacks and prop. These are designed which helps to facilitate easy removal of beams and floor. We provide these dropheads in various capacities that makes it capable to take heavy loads.
Steel Scaffolding – Socket Base
Product Specification
Material: Mild Steel
Hardness: 20 – 50 Hrc
Plate Thickness: 1 – 30 mm
Tube Height Up to: 4.5 Inch
Minimum Order Quantity: 100 Piece.
Steel Scaffolding – Fixed U Head
We are offering you a valuable product like Fixed U Head. These are designed for use in conjunction with Adjustable Steel Props to hold timer beams and formwork accessories.
Specification
- Our experts follow the pipe is of hot rolled steel as per BS-1139 standard
- Built from 38mm X 4mm pipe, 100mm length
- The size of U is 150 X 170 X 125 X 100, 5mm, 6mm, and 8 mm
Steel Scaffolding – Adjustable U head
We are the top most leading supplier of Adjustable U head across country. We also ensure that our adjustable U head is tested on various quality parameters for the confirmation of safety.
One of the best and toughest product build with high quality and the Pipe of Hot Rolled Steel as per BS-1139 Standard. Made from 38mm X 4mm pipe, 650mm length, the size of U is 150 X 170 X 125 X 100, 5, 6, 8 mm.
Features:
- Reliable
- Durable
- Adjustable
Steel Scaffolding – Universal Jack
We are manufacture and export of Universal Jack in a very large way.
Pipe of Hot Rolled Steel follows as per BS-1139 Standard. And made from 38mm X 4mm pipe, 650mm length.
Features:
- High strength
- Rust resistance
- Enduringness
- Stalwartness
Steel Scaffolding – Cuplock – Beam Bracket
It is used to support internal down-stand beam. The use of cup lock beam brackets with Jacks accepting beam spanning from one bracket to another bracket, it can avoid the need for ground-based support, thus saving all the other components that would be needed below the drop beam.
Steel Scaffolding – Cuplock – Cantilever Beam Frame
Specification:
Pipe of Hot Rolled Steel as per BS-1139 Standard
Made from Pipe of 48.3 mm X 3.2mm pipe, 1.25mtr, and 1.3mtr distance.
Steel Scaffolding – Cuplock – Cantilever Beam Frame
Product Specification
Surface Type – Hot Dipped Galvanized
Color – Red
Material – Steel
Specifications:
| Code | Length (mm) |
Weight(kg) | |||
| Painted | Self | Hot Dip | Zinc | ||
| BTSF-1086-10 | 1000 | 16.65 | 16 | 17.27 | 16.48 |
| BTSF-1086-15 | 1500 | 18.2 | 17.5 | 18.7 | 17.85 |
Steel Scaffolding – Cuplock – Spigot Pin with Washer
Product Description:
We are an acclaimed name engaged in offering our precious clients a superior quality range of spigot or Joint Pin.
Steel Scaffolding – Cuplock – Spigot Pin with Bolt & Nut
Product Description:
We are involved in providing a faultless range of Spigot Pin Cup lock to the valuable patrons. Our company offers this product in different specifications that meet on the patron’s demand.
It is made from Pipe of 38mm OD X 4mm and height is 300mm.
Steel Scaffolding – Cuplock – Diagonal/Bracing Ledger
Product Description
We are indulged in offering a normal range of Diagonal Brace. Built with a swivel blade at both the ends, these are placed diagonally from ledger for diagonal bracing of scaffold structure to avoid twist.
Features:
- Robust construction
- Highly durable
- High functionality
- Low maintenance
Steel Scaffolding – Cuplock – Intermediate Transom
The intermediate transom allows field shortening and comes in a variety of lengths:
| Item Code | Angle Size | Length Meter Inch |
Material | Weight (Painted) (kg) |
| 5003-070 | 50×50 mm | 0.7 27.55 | S235 | 5.80 |
| 5003-100 | 50×50 mm | 1.0 39.37 | S235 | 7.20 |
| 5003-120 | 50×50 mm | 1.2 47.24 | S235 | 9.80 |
| 5003-180 | 50×50 mm | 1.8 70.86 | S235 | 15.0 |
| 5003-240 | 50×50 mm | 2.4 78.74 | S235 | 21.0 |
Steel Scaffolding – Cuplock – Ledger
We are offering for our clients to quality approved Cup lock Ledger. We provide cup lock ledger can be accessed in varied sizes and dimensions for applications in different companies. Our professional’s team use the latest technology and optimum quality raw material for manufacturing.
Features:
- Excellent strength
- Non-corrosive
- Easy installation
Steel Scaffolding – Cuplock – Standard
Generally, we offer our customers a large variety of Cup lock Standard in different sizes so that it can be easier for support. The upper cups are produced from flexible casting. The welded bottom cups are made of profound steel.
Specification:
- Made from Pipe of 48mm OD, 4mm or 3.2mm.
- Available in lengths of 1mtr to 3mtr.
Features:
- Widely used
- High quality
- Long consistency
Steel Scaffolding – Cuplock – Base Jack
The pipe is of Hot Rolled Steel as per BS-1139 Standard, Jack Nut of SG Iron Castings. It is made from a pipe of 38mm OD X 650mm Height. The Breaking Load of cup lock base jack is 10 Tons.
